Recommended Application
- Fixing vitrified tiles on floor surfaces
Instructions for Use
Mix 5 liters of clean water with 20 kg of Bustan Glue (TGW) and stir thoroughly until a smooth, lump-free paste is obtained. Ensure the surface to be tiled is clean, dry, and structurally sound. Old surfaces must be free from grease, oil, wax, dust, or any other contaminants.
At site, the amount of water may be adjusted slightly to achieve the required consistency. Mix well until a homogeneous paste is formed. After tile installation, allow the adhesive to set for 24 hours before filling joints.
Technical Data
- Appearance: Light Grey / Off White
- Shelf Life: 12 months when stored in original sealed packaging in a dry environment
- Mixing Water: 5 liters per 20 kg bag
- Application Temperature Range: +5°C to 50°C
- Adjustability Time: Up to 45 minutes
- Foot Traffic: After 24 hours
- Grouting: After 24 hours
- Interval Before Normal Use: 14 days
- Coverage: One 20 kg bag covers approximately 50 sq. ft. at 3 mm thickness
Details
| Packaging | Plastic Bag |
|---|---|
| Weight: | 20 Kg |
| Colors Available | White & Grey |
Reviews
There are no reviews yet.